Tuesday, April 25, 2017

3D to 2D






Parts of the map relief were cropped down and made into a digital pattern. When the pattern is zoomed out it creates this effect that give the visual effect if 8-but scales seen in the earlier renditions of video games. 


Saturday, April 22, 2017

Masked Identity







Memento


A circle was cut rom a piece of old wood. I chiseled a triangle out of the center. I chiseled an identical triangle out of a piece of fire brick. Using layers of copper sheets I used a propane torch to meld the copper down into the basic shape. I then proceeded to heat the copper and then hit it on the anvil and cooling it. After that I chopped the edges to clean them up. The piece was then sanded and polished. I put a layer of vinyl over the wood and applied a mix if gel medium and ink. the wood was then treated with polyurethane and then waxed and oiled to improve durability. 

Map Relief






























2 Large sheets of paper were cut to size. Lines were set 1 inch apart vertically and 1.5 inches horizontally. Paper was folded on those lines and new lines were drawn from intersecting point and alternated from left to right. those were the folded. Once folding was complete the paper was mounted on poster board and moved around to get the effect of a low polygonal mountain range. pushing 1 end of the mounted sheet will change it's entire formation. The effect of changing formation along with the way light plays on the different faces makes this piece dynamic. 



Balsa Wood



The Idea for this was to create these geometric shapes. One of these shapes had negative space in the middle, the smaller one is filled in. This was used to represent scale trying to maintain a similar shape from the smaller shape to the larger shape. Balsa wood legs were put in place to sandwich the wooden elements between to support them. 







This was sort of interactive piece which stood on 2 legs and rotated on the center pins. There are a series of triangles all rotating on the center pointy. This was to represent repetition. Similar elements were placed throughout the center point. 






This has a backing of glue supported by 3 legs and a spiraling piece of paper.  The paper is the lightest part of the piece spiraling on 2 set pins. This piece is to show focal point. The eye is drawn towards the center lightest value making the paper the most noticeable part. 























Soap Animals







Masking Tape Shoe